T27 Ceramic Flap Discs

T27 Ceramic Flap Discs are the ultimate choice for professionals and DIY enthusiasts seeking high-performance grinding solutions. Crafted with high-quality ceramic grain, these flap discs enhance efficiency with their exceptional cutting power and superior heat dissipation, allowing for effective grinding and blending of welds while maintaining a cooler working temperature.

These flap discs are specifically designed for heavy-duty applications, making them ideal for use on angle grinders. Whether you’re preparing surfaces for finishing, deburring, or performing weld grinding, these discs provide the versatility needed to tackle various tasks. Their design ensures effective rust removal and they deliver excellent performance on both flat and contoured surfaces.

The self-sharpening feature of the ceramic grain extends the life of the discs and reduces loading, ensuring that you can work longer without frequently changing discs. With a standard dimension of 4.5″ x 7/8″, these flap discs are well-suited for a wide range of metalworking applications. Continental Abrasives guarantees the quality and satisfaction of their products. If you’re not completely satisfied with your order, you can easily reach out for a return by calling 1-866-601-8105.

Key Features:

• Type: T27 standard ceramic flap discs
• Material: High-performance ceramic grain
• Applications: Surface prep grinding, weld blending, rust removal, and finishing
• Designed For: Heavy-duty use on angle grinders
• Performance: Twice the cutting power and improved heat dissipation
• Self-Sharpening: Ensures longer life and minimal loading
• Dimensions: 4.5” x 7/8”
• Pricing: Sold by the box (100) or case (1200)
• Shipping: Free shipping available for orders

Pricing (Sold by the Box of 50):

All with FREE SHIPPING!

• 4.5″ x 7/8″ x 36 to 120 Grit, Box of 50: $289.50 (5.79 per disc)

Note: To mix & match with other Discs or other products, call us at 1-866-601-8105

Operating instructions:

• Select the correct flap disc type and grit for your material and application.
• Inspect the flap disc for cracks, tears, broken flaps, or other visible damage before use.
• Ensure the grinder’s maximum RPM does not exceed the maximum RPM listed on the flap disc.
• Disconnect the power source before installing the flap disc.
• Mount the disc securely on the grinder, using the correct flanges and ensuring proper centering.
• Tighten the disc according to the manufacturer’s instructions.
• Test run the grinder at full speed in a safe area for at least 60 seconds before applying to the workpiece. Avoid standing in the disc’s direct path during this time.
• Hold the grinder at a 15°–25° angle to the surface for optimal grinding and flap wear.
• Use light, consistent pressure and move the tool in smooth strokes across the surface.
• Do not force the flap disc into the material; let the abrasive do the work.
• Avoid prolonged grinding in one spot to prevent overheating and rapid flap wear.
• Allow the grinder and disc to come to a complete stop before setting it down or changing discs.

Handling:

• Store flap discs in their original packaging in a dry, cool place away from moisture and sunlight.
• Avoid stacking heavy objects on top of flap discs to prevent warping or damaged flaps.
• Handle discs carefully to avoid impacts or drops that could cause hidden damage.
• Always check for any signs of warping, cracks, or loose flaps before use.
• Keep discs flat during storage and prevent contact with oils, solvents, or corrosive substances.

Safety information:

• Always wear ANSI-approved eye protection, hearing protection, gloves, and a dust mask or respirator suitable for the material being ground.
• Use only with properly installed and functioning safety guards on your grinder.
• Ensure the workspace is clean, dry, and free of flammable materials. Keep bystanders at a safe distance.
• Never exceed the recommended RPM for the installed flap disc.
• Do not use flap discs for side grinding or for applications other than their intended use.
• Replace the disc immediately if you notice excessive vibration, noise, wear, or visible damage during operation.
• Follow all manufacturer and tool safety instructions and dispose of used or damaged flap discs according to local regulations.

FAQs:

Q: What are T27 ceramic flap discs best used for?
A: T27 flap discs are ideal for surface preparation, grinding, blending welds, rust removal, and finishing on irregular surfaces.

Q: How does the ceramic grain benefit these discs?
A: The ceramic grain provides superior cutting performance and better heat dissipation, allowing for effective grinding without overheating.

Q: What machines can these mounted aluminum oxide flap wheels be used with?
A: These t27 ceramic flap discs are compatible with bench grinders, pedestal grinders, and straight finishing tools with appropriate arbor sizes.

Q: Are these T27 ceramic flap discs suitable for heavy-duty applications?
A: Yes, these flap discs are designed for heavy-duty use on angle grinders, making them suitable for professional applications.

Q: What size are the T27 ceramic flap discs?
A: The T27 ceramic flap discs are available in a standard size of 4.5” in diameter in various grits from 36 to 120.

Q: How do these T27 ceramic flap discs compare to other flap wheels?
A: T27 ceramic flap discs offer greater versatility in machine application and are typically known for their fast action and increased longevity.

Q: Is there a satisfaction guarantee?
A: Yes, Continental Abrasives offers a complete satisfaction guarantee. If you’re not satisfied, you can arrange a return by calling 1-866-601-8105.

Check out our other flap discs