In this post, we wish to inform the reader of some key factors to consider when it comes to buying the best work gloves and safety gloves for construction. This is important information to know for multiple reasons. Having the right glove for the construction industry application you need it for can greatly improve your work performance and protect your hands at the same time. These are the main reasons for using construction work gloves in the first place.
You always want to keep your hands in gloves with a comfortable fit and keep them dry when you’re working. Just ask anyone who’s ever had to mix mortar in cold weather or swing a hammer all day with a cheap pair of split leather palm gloves. No matter how tough we are mentally and physically it’s human nature for us to avoid physical pain. So it’s only common sense that you’ll get a lot more work done with a pair of comfortable well-protected hands than you ever will with a pair of cold, blistered, red chafed hands.
You also want to keep your hands fully protected from any one of the many elements that can hurt them when you’re working such as cold weather, cuts, and abrasions. Whether you’re swinging a hammer, installing a toilet main, digging a ditch, or replacing an engine you’ll want gloves that will keep your skin safe, comfortable, and protected whilst you perform that task to the best of your ability.
This guide will focus on three main areas:
- What matters most in choosing the best gloves
- How to choose the best work gloves for your industry
- Top 10 picks for the best work gloves for the construction industry
What matters most in choosing the best gloves.
No matter what the specific application for the gloves are there are some key factors that apply to all gloves universally. First off, they need to fit right. Having gloves that are too small will cause discomfort and restrict movement. Having gloves that are too large or that stretch too much won’t feel right either and that excess space will undoubtedly rub against your skin the wrong way and leave you with blisters. Try to look for a glove that fits you well enough that you don’t feel the need to keep taking them off between tasks. Whether you’re buying really high-quality Mechanix wear gloves or cotton jersey work gloves you should always look for the best fit and try to choose ones that have really good elastic cuffs or some type of closure strap that keeps them secure on your hands. This is especially important with winter work gloves.
Secondly, they need to protect your hands as much as possible. There are different levels of padding and different materials that will give you different levels of protection. For instance, leather is going to be the best choice for protection against abrasion while the choice in padding thickness will play a role in cutting down on fatigue. If you’re working outside in a cold environment you’ll want to choose thermal gloves that are properly lined for the winter and preferably waterproof. Nothing beats actual experience to determine which gloves offer the most protection but those are some good reference points.
Lastly, you’ll want to get the most bang for your buck. If you are supplying these gloves for your workers you obviously don’t want to waste money on them by supplying more than what is needed. A lot of companies use disposable gloves when it comes to hand protection. Nitrile gloves are quite popular also as they are a little more abrasion-resistant. This doesn’t mean that you should only look for the best price as that can be a bit misleading as to the true value. For instance, you can buy brown jersey gloves for .89 cents a pair or $2.99 a pair and it would seem obvious which ones to buy right? Not necessarily. If you look a little deeper you’ll discover many key factors such as their weight and do they provide comfort. What does this glove feature exactly? Are they 8oz or 10oz? Are they flame resistant? Do they have strong elastic cuffs that don’t wear out easily? What kind of lining do they have if they are lined? Are they machine washable and if so, do they retain their original form so you can keep using them?
A pair of string knit work gloves that you buy for .89 cents, use once and throw away doesn’t match a better pair of tear-resistant gloves that are three times more expensive but feel much better, protect you better, and last 10 times longer. Focus on saving money over time if your crew is going to actually take care of what you give them. If your turnover rate of construction gloves is very high due to your guys’ rough usage or just simply losing them a lot then you’ll obviously have to take this into consideration as well.
How to choose the best work gloves for your industry
The type of labor you’re doing on a construction site as well as practicality is going to be the best indicator for what type of personal protective gloves you’ll need. For example, if you’re running a landscaping or framing crew or something similar that deals with the outdoor elements and you have a lot of workers your consumption rate is going to be way higher. You don’t really need expensive top-grade gloves here as your guys are going to burn thru them or lose them at a higher rate and you’ll more than likely be replacing them quite often. Your best bet here would be to go with some good palm coated work gloves for better gripping strength. These seem to be the best option for price and performance. This will depend greatly upon how many of your construction workers or employees wear gloves and the rate at which the gloves are being consumed.
If your construction industry work deals with any type of chemicals or oily and greasy surfaces such as plumbing or sewer work you’ll want to choose a chemical-resistant rubber type of glove or gloves that have oil-resistant rubber palms and fingers. There are different variations and gas gloves out there such as smooth palm or rough textured palm and dotted palms depending on the grip you want. There’s even a brand of safety gloves with excellent cut resistance called ‘’The Ugly Glove’’ made specifically for this purpose. They are heavy-coated and puncture-resistant. If your work is in the cold leather gloves and split leather working gloves are ideal as they protect very well, are very durable and remain flexible. Again this will depend upon the end-user as to which gloves are the best for your needs.
If your industry is a little more precise or technical such as doing motor work or electrical work you’ll want something like a foam nitrile that offers very good protection but allows you full dexterity all the way to your fingertips. If the price is not a factor it’s better to go with some form of leather driver gloves or a synthetic leather glove or Mechanix wear style gloves with a leather palm. There are quite a few options out there including padded, lined or unlined, fingerless, insulated gloves for high voltage, etc. Not to mention the different types of specific welding and metal fabrication gloves. We will offer a few suggestions on these in the next section.
There are also different types of leather work gloves that are suited for different applications. If you’re doing a lot of manual labor you’ll want to go with a leather grain cowhide with a safety cuff. Buffalo and goatskin are great tight grip work gloves also. All perform well against cut and abrasion damage and rough usage with cowhide being the most cost-effective, buffalo being the toughest and goatskin being the strongest and most pliable. Ironclad heavy utility gloves are a great example. At the other end of the spectrum, you have the softer more flexible leathers such as pigskin which doesn’t harden or stiffen when wet, deerskin which does the same but is a little lighter keeping your hands less sweaty or sheepskin which is the softest and most comfortable leather that is sensitive to the touch. These make for the best leather drivers gloves.
Top 10 picks for the best work gloves for the construction industry
Here are our top 10 picks for the best work gloves. Whatever the application, you’ll find it here!
#1 CAIMAN MECHANICS GLOVES
These are some really tough knuckle protection gloves with all the benefits you’d expect at the most competitive price.
#2 SHUBEE UGLY GLOVES
These are the best plumbers and utility work gloves on the market period!
#3 GRIP FIT PALM GLOVES
These are the best general-purpose rubber latex coated work gloves and have 3 different styles to choose from
#4 N-TECH NITRILE PALMS GLOVES
These coated work gloves offer better resistance than rubber and have 3 different styles to choose from.
#5 ATLAS NITRILE COATED GLOVES
Same as above but fully launderable, very popular with landscapers
#6 DUBARRY SUPER RUGGED HEAVY DUTY RUBBER GLOVES
These are very rugged and particularly popular with masons and tile contractors
#7 ELITE GRIP TOUCH SCREEN FRIENDLY MECHANICS GLOVES
Great mechanics gloves with touchscreen-friendly fingertips so you don’t miss any calls.
#8 CAIMAN ULTRA HEAVY DUTY 21 INCH SPECIALTY WELDING GLOVES
If you’re looking for the best in welding gloves, look no further.
#9 ELITE” NITRILE GLOVES
These are about the best value out there
#10 CAIMAN PIGSKIN WATERPROOF MECHANICS GLOVES
A very breathable and durable cold-weather option
We hope that this guide has been helpful to you and hope that you use this information to choose the gloves that are the right fit for you.
Welcome back. Our last article was on how to clean your power tools and hand tools.
In this article, we will share with you a few ideas on how to store power tools as well as hand tools. If you are a construction professional or just a family handyman with a tool belt and a lot of tools in the garage these storage tips should give you some ideas on how to best organize tools and make them clearly visible which will save you both time and space that you could use for getting that project done. Not to mention, it’s going to look so cool when it’s finished that you might want to use it in your project portfolio.
We have put together this guide in the hopes that you’ll take the time to get organized if you’re not already or better organized than you may already be. The time you spend now to do this will pay off handsomely with the time you save in the future. Nobody wants to be searching endlessly for a spark plug socket or tearing up the garage looking for that 3/8’’ socket. Knowing where everything is will free you up both mentally and physically to do what you do best. Now obviously there are more than a few methods that all work. What you’ll find below are just a few ideas on what we think are the most efficient as well as aesthetically pleasing.
This guide will focus on three main areas:
- First, How to store your power tools and hand tools enclosed
- Second, How to store your power tools and hand tools openly
- Third, How to create your own fully functional storage station for your power tools & hand tools
How to store your power tools and hand tools enclosed
The number one enemy you need to stay on guard for is rust which can be caused by humidity or by storing tools that are still dirty and moist after use. Storing your tool collection in an enclosed manner (in their original cases and or tool chests) has many benefits and should be utilized if your tool storage system is in any type of environment that has humidity issues such as a garage or trailer that isn’t heated or air-conditioned. One thing to keep in mind is that harsh temperature changes can have an adverse effect on circular saws and other power tools. You may want to consider investing in an air de-humidifier. They are relatively inexpensive and they don’t consume very much electricity which makes it a very useful little soldier to stand sentry against rust and corrosion. This would also apply to tool storage lockers if they are in an enclosed space.
One of the main benefits of keeping your tools, cordless drills, and drill bits in their original cases with storage guides or stored in toolboxes and tool chests is that you’ll be able to transport them easily and you’ll know where everything is. Just about all power tools whether they be corded or cordless have tough cases with snap-in placements for the tool as well as the accessories so they don’t go all over the place when you’re transporting them. This is the same for drill bit sets. When it comes to individual hand tools such as pliers, screwdrivers, and hammers you’ll want to make sure that you have a toolbox that has a tool organizer and enough space to hold what you’ve got and that it is very durable with heavy-duty latches that don’t break off easily. There are many like this on the market but the one we highly recommend is the DEWALT TOUGH SYSTEM https://www.youtube.com/watch?v=OGSOHWFmuVI
Their first run of these had a few issues but they have improved tremendously in 2020 making them the top choice in storage options. They also come in different sizes, are stackable and there’s a dolly you can purchase to carry them all at once. You can fit a cordless power tool such as cordless drills and miter saws in the bigger cases and everything else like blades, bits, and hand tools in the smaller ones basically making this a tool garage on wheels. They’re even planning on including power strips in next year’s model!
No matter which toolbox or tool case you have there will always come a time where your stuff is going to roll around inside of it. This causes confusion and wasted time as well as a lot of unneeded noise. There are a few tools storage ideas to remedy this situation. One thing that we highly recommend is to always line your toolbox/case with a rubber-type shelf liner or thin pile carpet. A rubber shelf liner will help keep your tools from rolling around and a thin pile carpet cut to size will do that as well but cut down more on the noise factor. Either one will work just fine or if space allows you can utilize both. Another idea that works well and costs little to nothing is to cover your tools with a shop rag or two before closing the lid. If you’re using something on the bottom and the top there’s no movement and no noise. You should label the boxes or plastic compartments to distinguish between drill bits, screws, washers, etc.
How to store your power tools and hand tools openly
When it comes to storing tools openly we suggest something similar to the French cleat method which is the tried and true method of using a pegboard on the wall with brackets for organizing and storing your tools. There are several reasons to do this but the most common is that a good storage rack saves space and allows you to organize power tools and hand tools in a very easy to locate. However, as stated above you’ll want to take extra special care to protect against humidity if you’re going to be utilizing this pegboard method of garage storage. Extreme heat and extreme cold can cause a great deal of humidity which brings rust and corrosion. Make sure that you invest in a dehumidifier to protect your investment.
Installing pegboard is rather easy and the tools you’ll need are a screw gun, a level, and a jigsaw. The materials you’ll need are the pegboard and its’ accessories as well as some lathe screws.
Locate your wall studs taking into account that you’ll need a little space behind to accommodate the pegboard accessories and mounting pegs. If this is being installed over drywall you’ll need to use a stud finder and mark the area with your findings.
You’ll want to measure the distance between studs and cut out some 2’’ x 1’’ strips of wood to be used on all the edges and also vertically between studs and attach them to the studs using 3’’ stud screws.
You’ll want to measure any electrical outlets and switches and use a jigsaw to cut them out of the pegboard making sure that the trim plate will cover the opening.
Cut the pegboard to the size you need with a circular saw or a table saw and mount it to the wall with your screw gun using your lathe screws. The reason you want to use lathe screws is that they have a large washer head which will stop the pegboard from weakening and tearing when you’re hanging heavier tools on it.
Install magnetic toolbars for hanging wrenches, sockets, and other metal tools and metal rails for hanging heavier tools. This is a crucial step because pegboard is only 3/16’’ thick and won’t be able to handle a lot of weight in any one particular spot. So basically you’re going to use a metal rail system that has holes every inch so you can attach them to the studs by again using your lathe screws. Metal rail systems come with plastic rail covers which are good to utilize as well for smaller tools.
This is where you can incorporate any other type of tool cabinet or workbench to the area and really take advantage of the extra space that you’ll have by using the pegboard. If the pegboard is white you can add a fresh coat of white enamel gloss paint to the cabinet and workbench making it look better and easier to clean.
Add your pegboard accessories that come in a fairly wide range of hangers, baskets, plastic bin, hooks, and loops to accommodate any hand and power tool items you have to hang. For drill bits, you can use a piece of PVC cut on an angle and attached to the pegboard like a holding cup.
Start your power tools storage organizing while having a beer and listening to some good 70’s classic rock. The beer and music aren’t necessary but they make it a lot more fun. How you hang tools is up to you based on what makes sense to you. We recommend though trying to implement some sort of tool organizing ideas such as hanging all of your long garden tools in one long area, your cordless tools in an area of easy access and your strips and rail system together but again this is completely up to you to come up with your own storage ideas
How to create your own fully functional storage station for your power tools & hand tools
For this part, we’re going to post a video that we think is by far the best power tool storage rack system and the coolest looking one we’ve ever seen. You can use pegboard on the inside if you want to. It shows a completed cordless drill storage cabinet complete with battery charging stations. The video has instructions that are pretty straightforward and require a little bit of time to put together but we feel it is the absolute best in power tool storage ideas. Here you go, https://www.youtube.com/watch?v=hvqNDPSkfUw
We hope that these organizing ideas have been helpful to you and hope that you use this information to keep your tools stored in a manner that is effective and gives you a sense of pride in ownership.
Whether you are a licensed contractor with a crew or workers or just a do it yourself handyman, one key aspect of tool ownership has to be that of cleaning and maintenance. You’ve all heard the saying “An ounce of prevention is worth a pound of cure.” This saying is meant as a call to look after your health but it can very aptly be applied to removing the rust your tool collection as well as your bits and blades. If you take a few minutes to clean power tools you work with on a regular basis they’ll not only look and function better but they will undoubtedly last longer.
When purchasing a new power tool such as a cordless drill, an impact wrench tool or any kind of oscillating tools the tool manufacturers are usually really good about including user manuals and data sheets but you won’t generally see much information in regards to cleaning and maintenance other than a cursory sentence or two. Knowing how to effectively clean your tools and keep them that way will prolong the life of the tool while saving you hard-earned money in not having to keep replacing them with new ones. All that’s needed to clean the tools and remove rust in most cases are a few basic hand clean items, some compressed air, and some elbow grease.
We have put together this guide to help you know what methods work best to clean and remove rust from your power tools as well as your hand tools. If you do this on a regular basis you’ll find that your tools not only look like new again but they function at their best when they are stripped of all the grease and gunk that accumulate over any given period of time. Cleaning your tools isn’t just handy, it’s smart.
This guide will focus on three main areas:
- First, How to clean hand tools
- Second, How to clean power tools
- Third, How to clean drill bits and saw blades
How to clean hand tools
When it comes to cleaning your hand tools such as screwdrivers, hammers, and pliers there are a few methods out there as well as a host of different products to use. For this guide, we’ll focus on the method that we feel works the best. The following method for cleaning your tools is pretty straightforward and relatively simple. A little bit of elbow grease and patience and you’ll be amazed by the results you’ll get when you clean the tools properly.
What you’ll need for this method is:
- Simple Green All-Purpose cleaner or a similar cleaner/degreaser
- Wire brush or steel wool
- Soft rag
- WD40 or some other type of corrosion protector
- Fill a bucket halfway with hot water, then add your cleaner to fill in the rest of the way
- Simply put your tools in the bucket and let them soak for around 10 minute
- Remove the tools and dry with a soft rag using compressed air to clean out any gear
- You may still see some rust or debris that you can take off with a wire brush or steel wool
- For older tools, you may need to repeat this process and replace worn grips if needed
- Always dry the tools after cleaning & apply just a dab of 4 in 1 oil or some corrosion protector before storage
- You can clean your power cords by using a rag lightly dipped in your cleaner and held tightly in your hand and running the power cords thru it.
How to clean power tools
When it comes to cleaning your power tools such as your Dewalt cordless power drill or impact wrench or your Milwaukee reciprocating saw you’re going to want to take extra special caution in protecting the motor casing and open or exposed parts of machinery as well as any cables. It is a good idea to have the tool manufacturers’ guide or data sheets handy just in case. It’s always a good idea to use a toothpick or Q-tip for these areas. For the body, you’ll be using the same formula as above without putting it directly in the bucket. Don’t be afraid to apply your cleaner to clean power tools and get to it. Just don’t submerge it in the liquid as this can easily damage the motor and electrical parts.
What you’ll need for this method is: Simple green All Purpose cleaner or a similar cleaner/degreaser
- Wire brush or steel wool
- Soft rag
- Toothpicks / Q-tips
- WD40 or 4 in 1 oil
- Air compressor or a can of compressed air
- Always make sure that the tool is not connected to any power source or battery
- Use an air compressor or a can of compressed air to get rid of any dust and debris. You may have build up in the harder to see or vented areas
- Fill a bucket halfway with hot water. Add your cleaner to fill in the rest of the way
- Use a wire brush with your cleaning solution and steel wool to remove rust. Scrub lightly to avoid putting any scratches in your tool
- For the little nooks and crannies and vents, you’ll want to use a toothpick or a Q-tip
- Wipe off with a soft rag and repeat if necessary
- You may want to replace worn rubber grips if they’re really torn up. This method works really well to get them clean and non-sticky
- You can use corrosion protector like WD40 to apply lightly to the metal parts
- You can clean the power cords by running them thru a rag dipped in a little of the cleaner. This is the same for power cords too. Just make sure they’re dry before you plug them back in to use
- You can use this method for bigger tools also such as a 1’’ impact wrench or an air compressor.
How to clean drill bits and saw blades
Up until now what we’ve shown you isn’t very complicated. When it comes to cleaning your power drill bits and saw blades the method is pretty simple and straightforward but it is however important to note that cleaning your drill bits and saw blades is not the same thing as sharpening them. This requires a different process that you can do yourself but we recommend having your high-end saw blades such as Tenryu sent out to a company that actually specializes in sharpening saw blades. We’ll give some insight into both here and let you make your own decision. Having a sharp saw blade or a sharp drill bit will cut a lot faster and cleaner which saves you time. Never forget though that a dirty blade or drill bit can leave its mark of roughness on your surface. So keeping your blades and bits clean is just as important as keeping them sharp.
As far as cleaning here’s what you’ll need for this method:
- Simple Green or any All Purpose cleaner or a dedicated bit & blade cleaner like CMT formula 2050. Important tip – a citrus-based cleaner will work very quickly to dissolve pitch, gum, and tar.
- A shallow pan or a 5-gallon container lid
- Brass wire brush, a softer tooth style brush style
- A regular style tougher type wire brush
- Rag or heavy-duty paper towels
- File, or popsicle stick & sandpaper (coarse & fine)
- Place the blade or bit/s into the shallow pan or lid and fill it up with the cleaning solution you’ve chosen
- Let it soak in there for around ten minutes to soften the build-up of pitch, tar & gum
- Next, remove the blade or drill bit and set it on the rag or paper towel
- Now take your soft wire brush and clean the cutting edges by stroking outward from the center
- Next, rinse it off with just a little bit of clear water and pat it dry with a rag or if you prefer you can let it air dry
- The process is the same for blades and regular type drill bits but when it comes to router bits you’ll need to take off the bearing so your cleaner can remove some of the grease and gunk that’s in there
- You should be able to spin that bit freely by holding the bearing with your fingers and spinning it. If it doesn’t spin freely, you’ll want to lubricate that bearing until it does
- For longer bits such as Auger bits, you can use a thin tube such as PVC tubing instead of a shallow pan and after soaking a while you’ll want to use a tougher wire brush to get off any rust or debris left on the bit. This may take a little while and some elbow grease
- You may want to remove the set screw from the tip and soak that also or you can replace worn set screws with new ones pretty inexpensively.
- Once you’ve cleaned the bit and dried it with a rag you can sharpen it with either a dedicated Auger bit file, a regular file or even sandpaper that you can glue to a small thin piece of wood such as a popsicle stick with a coarse grit on one side and fine on the other
- One thing to keep in mind when sharpening Auger bits is you never want to sharpen the outside edges of the cutting spurs as it reduces the diameter of the bit which would cause the bit to bind up as the diameter would be different at that end of the bit. Make sure you have data sheets or notes on the precise sizes
- When you’re filing the spurs keep your file to the inside and sharpen them to a fine edge which will result in a much cleaner hole
- Sharpen the cutting edges of the rest of the bit in the same manner by filing on the inside until a nice sharp edge is produced
- You can really get a good clean screw tip by taking your power drill and drilling a hole into some wood just slightly before the spurs are engaged and then putting a little oil into the hole and repeat the drilling into that hole.
We hope that this guide has been helpful to you and hope that you use this information to keep your tools clean and keep them working far beyond the normal consumer cycle. For more info on buying power tools online check out COMPLETE GUIDE TO BUYING POWER TOOLS ONLINE IN 2020
As a contractor or serious tradesman, one of the most crucial elements to success is to get quality tools (powerful drills, rotary tools & oscillating tools) that are available online in your hands at a good price and in a timely manner. Buying power tools online applies to business owners seeking the best hand tools, power tools, and air tools as well as landscapers & craft project tool users needing hand tools & outdoor tools such as leaf blowers and string trimmers for lawn and garden work. Fabrication shops and welders will be glad to know where to get the best deals on metalworking tools and angle grinders. Electricians, plumbers and other tool buyers who find themselves too busy to look up sometimes will benefit greatly to know where to get the best drill bit or drill bit set to drill holes as well as the best deals on cordless drills for hammer drilling & cordless power tools such as cordless impact drivers with a keyless chuck & brushless motor, driver kits, cordless screwdrivers, lithium-ion batteries & chargers. You’ll want to see pictures & videos as well as all the pertinent specs such as run time, speed setting, what size inch chucks, and what reward cards if any are being offered.
Not to mention specialty tools like variable speed orbital sanders, belt sanders, circular saws, and tool belts as well as safety equipment. Whether you’re a professional cabinet maker or a guy doing cabinets from his garage it’s always a good idea to know the best sources for top name tool brands as well as discount tools, bare tools, and tool accessories. If you’re looking for the best deal on an air compressor or the latest avid power impact wrench to add to your tool collection. Yes, anything from a sliding miter saw to vacuum cleaners to air conditioners for small home centers can be found online, so why not take the time to educate yourself in this much-needed area of expertise.
We have put together this guide to help you know what to look out for when buying tools online. Knowing what to pay for quality products, tools and equipment not only saves you money but more importantly your precious time which can determine whether your business is successful or not.
Here is what we will cover to help you make the best decision buying tools & power tool accessories online:
1. The Benefits of buying tools online
2. What’s the best place to buy online tools?
3. What is the best time of year to buy power tools?
4. Which power tool brand is the best?
The Benefits of buying power tools online
The world has changed drastically in the last few decades, probably more than any of us ever imagined. Technology has put a lot of brick and mortar tool stores out of business. The certainty of whether or not this a good thing only time will tell. What is certain though is that the demand for tools and Jobsite equipment has never been greater. With over a million commercial projects underway and lots of competition out there, it is imperative for you to know how to shop online to get what you need for your project quickly and at the best price.
Obviously, a key benefit to buying tools online is that it saves you time and is quite easy to do from anywhere you’re at. All you need is a cell phone with the internet to find what you’re after. You can pretty well find anything for the industry online from Klein tools and Milwaukee tools to a sump pump to an air compressor to generator accessories to router accessories. Everything is there! This saves you the time it takes to drive to the local hardware store, park your car, find your item (if it’s in stock), stand in line, save the receipt for accounting purposes, etc. When time is a valuable commodity it just doesn’t make sense to spend it in a way that you don’t have to.
Another important factor to be considered is the fact that with so much competition online for say a lithium-ion cordless drill to a Black & Decker cordless tool it’s pretty easy to discern a good price for the item you’re looking for. Generally speaking, Amazon usually has the cheapest prices and they show up quite often just by typing in the name of the tool you’re looking for. This can be a pretty handy tool to compare prices quickly. There’s even a section at the bottom dedicated to reviews from customers like yourself. Before you buy that pressure washer or cordless impact driver you can read what users have to say about it first.
This can be very beneficial but as with anything opinions may vary. A good rule of thumb is to use common sense when reading the reviews. Does the user know what he’s talking about? Does it seem like a legitimate concern he has about the tool or does it seem like a hasty opinion? Are the praises based on actual use of the product and its functionality? A lot of buyers will give early praise to a product just because he got it quickly and cheaply. This can be fools’ gold for the professional contractor who will need to know that these cordless drills are durable as far as the drills power and that the drill accessories you bought to go with it actually fit and are the best ones out there for the material you’re drilling.
You can ascertain a lot of good information from others experience but it’s always a good idea for you to gather as much info as you can before making your final decision. What matters most is your experience with how that impact wrench feels in your hand and how smooth it takes off those lug nuts. Or how the weight of that nail gun feels after a full day’s use. Most times you’ll already know what it is you’re after but always keep an eye out for new and inventive technology. As stated earlier, there’s a lot of competition out there and all the big companies like Milwaukee, DeWalt, and Makita are working every day to make better more efficient tools and drills & drivers.
What’s the best place to buy online tools?
There’s an old saying that if you ask a thousand people a question, you’ll get a thousand different answers. We’re obviously not going to be stating that many individual answers here nor do we think it would be very helpful to do so. We will, however, try to shine a light on a few types of places that seem to score very well.
With most online shoppers Amazon is the first place that usually comes to mind and with good reason. They are the largest online store in the world and will often have the cheapest price as that is their niche. Saving money is always a good reason to shop somewhere. If you know exactly what it is you’re looking for and an idea of what it costs than Amazon is a good bet. This seems like a no brainer, however, there are a few key points you may want to consider.
First off, you’re going to want to know exactly what it is you’re looking for because there is no customer service to point you in the right direction or answer any questions you may have. You will never speak with anyone at Amazon and there is no number to call. They are so big that they don’t need to care about you or your business and that’s just fine with a lot of consumers. Quick, cheap, computerized, and completely devoid of any human interest and emotion to get between you and your online buy. I mean, after all, this is exactly what Cannibal Capitalism looks like.
Questions to Consider
This brings up some other sticking points in the minds of many online shoppers. What if, you need to return your item? What’s the exact process? How exactly do you go about it? Who do you contact? Do you need to go to the post office, Fed-ex or UPS? Who is paying for the return or the downtime it will cost you? Who do you call if you want to keep the impact drivers you purchased but are a little confused with the functionality of them because the Amazon distributor didn’t include the directions in the mad rush to get it out the door cheaply and super-fast.
What if all you have is a simple question to make sure that this is the best tile blade for that particular cut of old restaurant tile for that big renovation you’re doing. What hand warmers last the longest when you’re using them 10+ hours a day? Exactly which tool bags and belts will hold up to constant abuse day after day, year after year? What kind of heated jackets should you get for your guys to keep them warm during a Wisconsin sub-zero winter? Which hand saws are the most durable and cut the smoothest?
These are all valid questions that you’ll be responsible to find the answers for. Now we’re not discounting the benefits of easy, cheap shopping. For a lot of consumers that are buying a certain exact item, it’s a fast way to do it and that does make sense. All of the online stores that follow that same computerized business model seem to be fairly competitive with each other in regard to price.
When buying tools online there are some other key factors to consider. Obviously, saving money is important but not quite as important as who you’re saving that money with. Does the online vendor have any real interest in earning and retaining your business after the point of that initial sale? Will they have any reason to put in any effort into understanding and anticipating your needs? I think you know the answer to these questions. This brings up the issue of who to deal with that actually has a vested interest in making sure that you are well informed, get exactly what you want, and are happy with your purchase. You’ll need more than a computerized store for this. Human interaction will be needed. Let’s look at this squarely.
A lot of shoppers don’t like dealing with salespeople which are easily understandable. Many have given the industry a black eye by being too pushy or too arrogant. The simple fact is that no one wants to be pushed into a sale by some overly persistent salesman trying to hit his daily quota. This may have been the standard once but we don’t live in that world anymore. This is the information age with everything we want readily available. No one ever needs to be badgered.
Find a Good Partner Online
On the other hand, what business professional in the industry, as busy as he is, couldn’t use a trusted advisor to help him navigate the course? It goes without saying that trust is a virtue that must be earned. So make that vendor earn it. Check out their site. See if it offers a wide range of tools. Do they have top name brands? Are they competitively priced with what’s online? Are there good quality descriptions of the items you want to be accompanied by various pictures of those items? Most importantly is there anyone you can speak with that will have a vested interest in making sure that you are properly informed with all the information you need to make the right choice?
There’s no substitute for that type of human interaction because the person or company that really wants your repeat business is going to understand your needs and wants much more than a computerized corporate site ever could. It stands to reason.
So we feel that if you find a site that has all of that as well as a trusted advisor that will be honest with you on all levels and truly appreciates your business, as well as your concerns, will win hands down!
What’s the best time of the year to buy power tools?
There’s always a need to see when things are going on sale and usually that’s right after Thanksgiving right on thru until Christmas. It’s a great time to stock up on inventory and save money at the same time because every online vendor will be competing to have the best prices for the season. That’s a given. However, a really good and often overlooked time to buy is right after the holidays when everyone is exhausted from spending, spree shopping, buying gifts for friends and family as well as overeating. A lot of vendors will have their biggest specials at that time to make up for the lull in business that happens every year after the holidays.
These are commonplace observations and with good reason. Being that a smart company is always trying to gain revenue as well as a new business, you’ll want to keep your eyes open for online stores that regularly do specials and promotions for those reasons. Again, check the price, do the math, and always ask yourself if this makes sense for the future as well as the present. After all, a penny saved is a penny earned and those pennies can turn into a lot of money saved at the end of the year!
Which power tool brand is the best?
There’s a wide range of debate on this subject going back decades so we don’t want to prejudice anyone or cast any aspersions on any top name brands. It is always up to the professional contractor or craftsman to decide which brand best serves him. We can however share our experience on this subject to help you make a wise decision.
When it comes to power tools Milwaukee seems to have the best reputation for durability, but this is based on past as well as the present. When it comes to bandsaws and power-saws Milwaukee is hard to beat. They have always paid close attention to the bigger tools as well as the smaller ones. If you’re looking for a heat gun or say a good toolbox, you’ll find the same quality construction in these items as you would in say demolition hammers or rotary hammers.
They are definitely worth the money for bare tools as well as cordless tools!
However, the company that seems to have the biggest growth over the last decade is undoubtedly DeWalt. From their hammer drills to their cutout tools (oscillating multi-tools) and everything else they put on the market, they seem to hold up well and are made for rough use. They are also about the best-priced tools on the market for what you’re getting. Another key factor with DeWalt is their service. They have a service center in every major city as well as a lot of smaller towns and there’s never any hassle with their warranty if you have a receipt.
Another key factor with DeWalt is that they are always coming out with new and more powerful tools. Their 20-volt max series is a huge seller in combo kits or individually and their batteries and chargers seem to hold up very well. They have a good line of pneumatic tools as well that are fairly priced but if you’re doing a lot of maintenance and shop work, you’ll want to use Aircat.
They are the quietest air tools in the world with the highest torque. Never seen or heard of a negative review for any Aircat tools.
Of course, there are other categories that fall outside of these general suggestions such as vacuum accessories, test and measurement tools, perhaps say drain cleaning tools but there again, that’s where it pays to have a trusted advisor that has serious knowledge of not just one industry but of all industries related to construction, maintenance, etc. If you find a good online company that checks all of these boxes, we feel you’ll be a lot better off not just financially but in regard to the time you’ll save as well.
We hope that this guide has been helpful to you and hope that you can use this information to help you make the best online buying decisions going forward. You may even find that perfect partner to help you for years to come.
If you have any questions or comments please feel free to message us and we would be happy to help.