For customized orders, quantity discounts, or help locating an item not listed on our site, call us at 1-866-601-8105

TENRYU POWER TOOL SERIES MITER/SLIDE SAWS

TENRYU POWER TOOL SERIES MITER/SLIDE SAWS

TENRYU POWER TOOL SERIES MITER/SLIDE SAWS

 

Power Tool Series for the Contractor. Exceptional features and superior quality, Thin Kerf, TENRYU POWER TOOL SERIES MITER/SLIDE SAWS are the #1 choice of professionals!

 

TENRYU’s comprehensive line of blades for portable and stationary power tools include these supreme grade TENRYU POWER TOOL SERIES MITER/SLIDE SAWS too. Next, The Tenryu power tool series offers more variety besides better quality and greater value too. More than that, sizes range from 4″ to 12″ for most types of applications. Equally important The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.

Lastly, creating a TENRYU saw blade involves at least 40 separate processes. Moreover, it is because these are executed by the most knowledgeable and experienced saw blade makers in world. Furthermore, these blades are produced in large quantity, however, every blade gets unparalleled individual attention during production.

 

TENRYU POWER TOOL SERIES MITER/SLIDE SAWS

FEATURES:

  • Fully hardened and expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
  • High-grade, C-3, fine-grain tungsten carbide tips again resist erosion for extended blade life.
  • Aggressive rake angles for maximum cutting speed and efficiency.
  • Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
  • Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
  • Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
  • Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
  • TENRYU POWER TOOL SERIES MITER/SLIDE SAWS Can be resharpened for extended blade life.
  • If you still have questions, here is a link directly to Tenryu
  • You can look up the info there or call us directly and toll free at 1-866-601-8105.
  • You can find the whole Tenryu line on our site here

 

Sawmill Creek Woodworking Community

 

TENRYU MITER-PRO PLUS SERIES

TENRYU MITER-PRO PLUS SERIES

TENRYU MITER-PRO PLUS SERIES

TENRYU MITER-PRO PLUS SERIES has all the features of our Miter-Pro series PLUS newly added technological improvements to make them better and heavier-duty than ever.

These supreme quality blades respond to customer demand! We now have a line of blades specially designed for high performance and heavier duty applications on miter saws, slide-miter saws and radial arm saws. These are our “Cadillac/Mercedes” grade miter saw blades.

TENRYU’S proven, super-true, laser-cut, hand tensioned steel plate with new and improved, patented, resin bond-filled expansion slots ensures smooth, accurate and quiet cuts.

Specially designed, top-quality, micro-grain carbide tips, honed to a precision edge with 600 grit diamond wheels cut clean and easy.

Zero degree hook angle prevents lifting of workpiece but does not make your saw overwork. The result is a safe, chip-free and smooth cut.

EACH BLADE FEATURES:

  • Finest and smoothest cuts ever on your miter or radial arm saws
  • Best suited blade for the latest Slide Miter Saws as well as traditional Miter Saws
  • Negative rake angle tooth design (-3 degree) – For finer cuts in thin or brittle materials
  • Reduced tendency to grab materials being cut

 

ALSO:

  • Additional, Resin-Filled Silencing Slots in plate eliminate troublesome vibration for smoother cuts, reduced noise and longer sharp-life
  • If you still have questions, here is a link directly to Tenryu
  • You can look up the info there or call us directly and toll free at 1-866-601-8105.
  • You can find the whole Tenryu line on our site here

 

Sawmill Creek Woodworking Community

TENRYU MEL-PRO HI-ATB

TENRYU MEL-PRO HI-ATB

TENRYU MEL-PRO HI-ATB

The Ultimate Melamine and Veneer-Faced Plywood Cutting Blade

The TENRYU MEL-PRO HI-ATB is a complete line of blades that solve problems associated with cutting melamine and other laminated wood products. Additionally, veneer-faced plywood can be cut without splintering at more reasonable feed speeds than in the past.

 FEATURES:

  • PREMIUM, INDUSTRIAL HI-ATB GRIND
  • Specially developed, top-grade, super fine grain carbide tip.
  • NEW: Additional, “resin-filled, laser cut body slots” succeed in vibration dampening to an even greater extent
  • Exhaustive, hand-hammer plate tensioning assures truer and smoother cuts.
  • Longer Lasting than our competitor’s or our economy series.
  • Hi-ATB design with negative (-5) rake angle tooth geometry – NO TEAR OUT!
  • TENRYU MEL-PRO HI-ATB – Traditional full-kerf, “European Style” blade design
  • C-4 hardness, super fine grain, anti-corrosive carbide tips for the keenest edges and extended sharp life

 

FINER CUTS– Precision ground carbide teeth set on hand-tensioned tool steel bodies produce finer cuts without chipping and “bottom-side blowout”.

QUIETER– Patented resin bond-filled expansion slots effectively absorb vibration and reduce noise.

LONGER LIFE– High-grade, extra-hard, micro-grain, anti-corrosive carbide teeth fight both chemical and abrasive wear to remain sharp longer. There are a lot of blades on the market that can cut melamine but only one can really cut it chip free, quieter, easier and longer – the TENRYU MEL-PRO HI-ATB

Numerous requests for a better melamine blade prompted us to spend over a year of research and development to bring you the world’s most advanced melamine cutting blade. The Mel-Pro features a fully hardened, expertly tensioned tool steel body that absorbs impact, remains flat and true, and resists excess heat buildup.

The Mel-Pro’s exclusive, red bond, resin filled expansion slots absorb vibration, reduce heat and permit the blade to run quieter than any other brand. The thin-kerf, mirror-like grind on super hard, specially designed carbide tips allow for lighter cuts and reduce friction heat buildup. The bottom line is your bottom line will look better when you reduce scrap, reduce sharpening costs and reduce noise in your shop with Mel-Pro blades.

  • If you still have questions, here is a link directly to Tenryu
  • You can look up the info there or call us directly and toll free at 1-866-601-8105.
  • You can find the whole Tenryu line on our site here

 

Sawmill Creek Woodworking Community

TENRYU STRAIGHT LINE RIPPING BLADES

TENRYU STRAIGHT LINE RIPPING BLADES

TENRYU STRAIGHT LINE RIPPING BLADES

  • 12” x 50 TEETH
  • 1” Arbor
  • ATAFR Grind
  • .118” Kerf
  • .087” Plate
  • Rake 20
  • Designed for ripping in wood with Straight Line Rip Saw.

 

For the finest saw blades in the world, such as these TENRYU STRAIGHT LINE RIPPING BLADES look no further than Tenryu, known around the globe as the premier manufacturer of quality saw blades. Thousands of satisfied customers attest to the reliable performance of TENRYU saw blades worldwide.

TENRYU makes over 3,000 different types of carbide blades for woodworking, metalworking, plastic cutting and machining other composite materials while at the same time blends high-tech scientific techniques with old-world craftsmanship to ensure that its saw blades are unsurpassed in design and workmanship.

 

EACH BLADE FEATURES:

  • TENRYU STRAIGHT LINE RIPPING BLADES have a select Grade of carbide tip for better performance.
  • With their large European style tips these blades will outperform any other blade on the market for a cleaner cut and longer life.
  • Their heavy, European plate style resists deflection during cutting for a much safer operation
  • The custom resin bond, laser slots are made to absorb and eliminate vibration to produce a cleaner, quieter, more efficient cut.
  • Excellent blade life ends up saving you a lot of money in the long run!
  • All of the Grind info and specs are located in the drop down box above
  • If you’re Straight line ripping then this is the blade you want. Try TENRYU and you will forever spurn the rest!
  • If you still have questions, here is a link directly to Tenryu
  • You can look up the info there or call us directly and toll free at 1-866-601-8105.
  • You can find the whole Tenryu line on our site here

 

Sawmill Creek Woodworking Community

 

TENRYU GLUE LINE RIPPING BLADES

TENRYU GLUE LINE RIPPING BLADES

TENRYU GLUE LINE RIPPING BLADES

For the finest saw blades in the world, such as these TENRYU GLUE LINE RIPPING BLADES look no further than Tenryu, known around the globe as the premier manufacturer of quality saw blades. Thousands of satisfied customers attest to the reliable performance of TENRYU saw blades worldwide.

TENRYU makes over 3,000 different types of carbide blades for woodworking, metalworking, plastic cutting and machining other composite materials while at the same time blends high-tech scientific techniques with old-world craftsmanship to ensure that its saw blades are unsurpassed in design and workmanship.

 

EACH BLADE FEATURES:

  • TENRYU GLUE LINE RIPPING BLADES have a select Grade of carbide tip for better performance.
  • With their large European style tips these blades will outperform any other blade on the market for a cleaner cut and longer life.
  • Their heavy, European plate style resists deflection during cutting for a much safer operation
  • The custom resin bond, laser slots are made to absorb and eliminate vibration to produce a cleaner, quieter, more efficient cut.
  • Excellent blade life ends up saving you a lot of money in the long run!
  • All of the Grind info and specs are located in the drop down box above
  • If you’re Glue line ripping then this is the blade you want. Try TENRYU and you will forever spurn the rest!
  • If you still have questions, here is a link directly to Tenryu
  • You can look up the info there or call us directly and toll free at 1-866-601-8105.
  • You can find the whole Tenryu line on our site here

 

Sawmill Creek Woodworking Community